AU3004

This constant-speed tensioning type tester is used for determining physical properties such as tensile strength, compressive strength, bending strength and elongation. Each operation can be done by a single operation. Such ease of operation is highly evaluated. This is a universal type tester featuring multiple functions and a high cost performance. This tester can test various materials used in diversified fields, including papers, plastics, rubbers, textiles, metals, adhesives, paints, glasses, ceramics and compound materials.

Test items : A specific jig ( optional) is necessary for each test.

( 1) Tensile strength
( 2) Compressive strength
( 3) Bending strength
( 4) Shear strength
( 5) Bonding strength
( 6) Delamination strength
( 7) Tear strength
( 8) Piercing resistance
( 9) Bursting strength
( 10) Rigidity
( 11) Friction
( 12) Z-direction tensile strength

Maximum load : 1 kN ( 100 kgf) , 2.5 kN ( 250 kgf) , 5 kN ( 500 kgf) Loading position : Tensile and compressive strength tests can
be made between the base and moving

crosshead

Crosshead stroke : 1140 mm
Effective test width : 420 mm
Crosshead speed : 14 speeds

0.5, 1, 2, 3, 5, 10, 20, 30, 50, 100, 200, 300, 500, 1000 mm/ min.

Crosshead speed setting : from 0.5 to 999.9 mm/ min. at 0.1
mm/ min. intervals

Traversing : manual crosshead lifting and lowering:

low speed ( 1 mm/ min.) , mediu speed( 50mm/ min.) ,
highspeed ( 500 mm/ min.) for both lifting and lowering
Crosshead speed accuracy : ± 0.2 %

Joe ( chuck) : parallel clamping ( standard) ,
pneumatic jaw ( optional)

Extension indication : ± 0.000 to ± 999.9 mm digital indication Load cell : 1, 2.5, 5, 10, 25, 50, 100, 250, 500 kgf
Jaw : parallel clamping type: 1, 2.5, 5, 10, 25, 50, 100, 250, 500 kgf Upper fixed crosshead : between this crosshead and movable crosshead, it is possible to make tensile tests.
Recorder : automatic balance type ( DC servo) , with a single recording pen ( red) ,
recording method: rapid pen recording ( with felt tip pen)
recording paper: effective width 250 mm, 20 mm long
roll paper
Referential standards : JIS P-8113-98, TAPPI T494om-01,
ISO 1924/ 2
Power source : single-phase 100/ 110 VAC 50/ 60 Hz 5A Outer dimensions : 800 x 530 x 1670 mm
Instrument weight : 150 kg

Harga	Bersaing
Jumlah	Satuan atau lebih
Kemas & Pengiriman	Sesuai pesanan
Negara Asal	Amerika Serikat