Detail Porosity Tester
Paper has been an important cultural asset since time immemorial.
Thanks to its astonishing quality, we have been able to keep delicate handwriting, irreplaceable documents and magnificent books for centuries.
High standards are still expected today in response to sophisticated
printing processes, stable packaging and sensitive processing methods.
Air Permeability Tester AKUSTRON.
checks filter paper, nonwoven fabrics, textile fabrics, etc.
for their permeability to air.
Easy to operate. Merely insert the test sample into the gap and push down the top part of the unit. Digital display of test data.
Test range 50 ... 3000 l/ m² · s at 2 mbar
Abrasion and Rubbing Resistance Tester
Design OSER
for determining the abrasion resistance of paper, board, films, glass, wood, metal, etc.
Also be used in conjunction with printing inks, dyes,
lacquers and other coating applied to any of the above
mentioned materials.
In case of printing inks, not only the abrasion resistance but also the resistance to wiping can be tested.
Abrasion Tester AT II
For examining the abrasion behaviour between forms and doctor blade materials under laboratory conditions, acc: to the ERA-Test Method 2.1
Option " COULOSCOPE CMS"
Instrument for coating thickness measurement
by the coulometric method.
TABER ABRASER Model 5131
evaluates and measures resistance to wear on varieties of materials/ coatings according to DIN 53 109.
- Compact, sturdy, sealed housing
- Electronic cycle counting
- LED readout
- Infinite selection of test cycles
DUAL TABER ABRASER Model 5151
for testing of two specimens
Apparatus for determining the stable absorptive capacity
of hygienic papers, especially tissue and pulp wadding acc. to
DIN 53450/ 1
Quadrant Balances
A sample of 100 cm² is cut and weighed on the appropriate balance,
the weight per unit area being read from the scale.
Model QW 200: Weighing range up to 450 g/ m²
Model QW 201: Weighing range up to 1250 g/ m²
BL 150
Portable Electronic Precision Balance
for determining the weight per square meter for a sample size of 100 cm² ( cutted out with PS 100) .
Capacity: 1 ... 15000 g/ m² ( 150 g effective) ,
Readability: 1 g/ m² ( 0.1 g effective)
Sample Cutter PS 100
recommended for the above Balances, for preparing rapidly and accurately circular specimens of 100 cm² , from virtually any type of material, including foils, paper, board, etc.
Pocket Form Gramme Balance
for ascertaining the weight per square meter by weighing a small
sample cut to the size of a template.
Graduation: 0 to 200 g/ m² in 2 g/ cm²
Fitted in a neat case complete with collapsible stand to screw into centre of lid, and with standard template 70x70 mm.
Half-size template available for doubling the weighing range.
Beating and Freeness Tester
Schopper-Riegler SR 1
For the determination of the drainage speed of pulp, mechanical and ground wood pulp.
With manual or pneumatic lifting and lowering device, in strictest confidence with ZELLCHEMING specification No. V/ 7/ 61.
Bending Resistance Tester
for measuring the bending resistance of paper as well as to determine the bending stiffness. Simple handling.
Applicable Standards: BS 3748, DIN 53121, ISO 2493, NF Q 03-048,
SCAN P 29 and TAPPI T 556
Bursting Strength Tester MTP 2
for paper acc. to ISO 2758, ASTM D 774, TAPPI 403
Measuring range 70 - 1600 kPa for board acc. to ISO 2759, DIN 53141, ASTM D 2259-74
Measuring range 350 -5500 kPa
Test piece clamping pneumatically with adjustable clamping force and automatically return after rupture of the specimen.
Classifier BRECHT-HOLL
for determining the Sliver- and fiber contents according to the
FAK-working instructions 201 as well as to Zellcheming specifications No. 201, 202, VI/ 3
Climatic Test Cabinet KPK
Models available for 35, 60, 120 litres capacity used for tests requiring constant climatic conditions.
Temperature range + 15° C up to + 80° C
Humidity range 30 % up to 95 per cent
Concora Medium Fluter
This instrument mechanically adheres a fluted medium strip to the
backing tape and dispenses a CMT specimen ready for testing.
It is available in standard A, B and C flute profiles and also modified
A, B and C flute profiles for heavier weight medium.
TAPPI Test Method T 809 om-87
Compression Tester
For determining the compression resistance of transport packages, also used as crush tester for testing liner, fluting, corrugated board, small packaging material, etc. ( FCT, CCT, ECT, PAT, CMT) .
Computerized Roughness Measuring System
Model 210-R
for determining the surface roughness according to the stylus principle. The system has the ability to analyse and
evaluate the surface characteristics of paper, board and foils which affect printability and influence the printing
quality in decisive form.
Important features:
- Quantitative statistics of measurements with statement of the direct
change relation with regard to printability of a surface.
- Graphic portrayal of the microstructures of a paper surface.
Cutting Machine
Solid, all-metal construction, high quality steel blade. Front gauge with narrow-strip-cutting device. Unbreakable, transparent safety-guard.
Table size 403x356 mm, Cutting length 385 mm, Capacity 50 sheets,
70 g/ m² ( Different types are deliverable! )
DENNISON STANDARD Paper Testing Waxes
to measure the printing and coating qualities of paper according to
TAPPI T 459 os-75, ASTM D 2482-76, CPPA D-11 specifications.
Laboratory Basic Set includes 18 waxes with graded adhesive power.
The test is used to determine the degree of sizing of the paper or of the coating in relation to press conditions. It can determine the ease with which a coating may " pick" from the body stock and can discover any tendency the body stock itself may have to split under the pick-off stress of the printing process.
Densitometer
for reflection measurements.
Measuring functions:
Density, Dot gain, Dot area, Trapping ( other functions available on request! )
Densometer Model DL
For determining the permeability of paper to air as per DIN 53 120.
Test area 10 cm² ,
Partial vacuum, adjustable between 20 and 250 mm water column Vacuum gauge with movable scale, measuring range 0 - 1000 cm³
Dimensional Stability Tester System FENCHEL
For measuring the expansion or shrinking quality of paper during the various printing operations according to DIN 53 130.
Clamping length 200 mm, Clamping width 30 mm
Disintegrator
for disintegrating according to Zellcheming spec ... No. V/ 4/ 61,
consisting of a round vessel to hold the pulp suspension, a triple bladed
propellor with shaft together with clamps and drive mechanism.
Dispersing Equipment
Specially developed for missing and dispersing of pulp suspension
for testing the degree of grinding and preparation of test sheets, corresponding to ZELLCHEMING specification No. V/ 6/ 61.
The main components are the stand with the drive motor, the mixing
vessel ( 180x180x360 mm) and the double bladed stirrer.
Double Bladed Test Strip Cutter
for test strips 15 mm wide or 12.7mm on request.
Length of cut approx. 300 mm.
With knife block, holding down blade and a pair of cutter blades.
Mounted on alloy metal base.
Drop-Testing Unit
for testing filled sacks, cardboard boxes and other packaging.
Testing method following DIN 55441, picture 1
Electric Incinerator VP 20/ 2
This apparatus is a convenient means for completely burning a paper, pulp or cardboard sample for the Ash test. Mounted on tripod stand with adjustable holder, flex, plug and socket.
Electronic Bench Micrometers:
Model 200-A MICROGAGE
Possible measuring ranges up to 10 mm, data output. Digital read-out of single measuring values or front panel read-out of high, low, average and standard deviation in connection with more tests.
Model 210-A MICROGAGE
Computerized system including the electronic bench micrometer with
RS-232 output, an integral adjustable increment drive, a computer, a printer and customized software. The result is a convincing report and graph of paper.
Elmendorf Tearing Tester
For measuring the tear resistance of paper according to
DIN-EN 21974: 1994
and ISO 1974: 1990.
Deliverable with exchangeable pendulums.
EMERSON SPEED DRYER
to determine the moisture content of paper samples, like Pulp, Paperboard,
Consistence Pads, Newsprint, Kraft, Groundwood, Tissue, regularly used
with the applicable TAPPI, CPPA, ASTM, APPITA Test methods.
Range: to 150° C
Model 130:
Plate Area: 14" x 24" , 1000 Watts
Model 135:
Plate Area 14" x 36" , 1500 Watts
Filter Paper Test Device Design HERZBERG
for determining the filtering speed of filter paper.
Test surface 10 cm² , Test pressure 0 - 300 mm water column
Friction Tester Model RK 2
Measuring device to determine the different slip properties of films.
Testing standards: ASTM D 1894-78 and DIN 53375
A strip of film of a width of 10 cm will be spliced on a movable table through-out the whole length of the table. This sliding carriage which can be charged with weights in the centre has been coupled with a dynamometer.
The movable table is to be moved beneath the sliding carriage with a steady motion of 100 - 1000 mm/ min by motor in order to determine the friction coefficient. The friction resistance can be seen on the dynamometer.
Gas Permeability Tester Type GDP
for establishing the gas permeability of plastic films and coated papers
with dry and damp gases according to DIN 53 380, volumetric method.
ORIGINAL GURLEY DENSOMETER Model 4110
The most popular densometer for measuring porosity and air permeability in materials of average values.
ORIGINAL GURLEY S-P-S Tester Model 4190
To measure smoothness, porosity and softness ( or compressibility) .
Option: " Model 4320 Programmable Digital Timer"
Both the automatic timer
and instrument base are recommended with the GURLEY instruments.
GURLEY Stiffness Tester
according to TAPPI T 543 om-94
Digital readout of the measuring values.
Haindl-Fractionator ( Shive Analyzer)
with McNett-Fibre Classifier
for the determination of the shive content and the classification of ground wood-pulp in one working process.
with 4 McNett tanks and suction equipment.
Spherical Hazemeter M57D
as per ASTM D 1003, BS 2782 and ISO specifications.
The light source is Source C corrected.
The HAZEMETER measures the HAZE ( light scattering)
and the light transmitting properties of plastic film and sheet.
It operates with an built-in digital read-out.
Heating Cabinets
Different models available with 20, 38, 48, 100 & 120 litres volume, with and without air-circulation by motor. Regulation ( temperature control)
automatically by Robert-Shaw-Thermostat.
Range from 5° above ambient temperature to 250° C ( higher by request) .
HPF 1 High Pressure Filtration Unit
The Purity Calculation based on polarimeter and refractometer measurements needs clear samples without any turbidity.
These conditions are given by the new High Pressure Filtration with aid of Cellite Diatomite. The central part of the filtration unit is a
changeable filter insert for easy cleaning and short filtering time.
The filter insert is covered by a stable lid with air inlet/ outlet valve,
indicactor for pressure and closed by an easy to use excentric lock with latch.
Max. pressure 6 bar. Filtration unit of stainless steel.
Filter insert for paper filters, 11 cm ø .
Internal Bond Tester
used to measure the average force, required to delaminate the fibers
in a paper specimen as described by the TAPPI Routing Control Method
RC-308.
The Internal Bond Tester may also be used as a pick tester according to the TAPPI Routine Control Method RC-306.
JUN-AIR Compressor Model 6-25
with 25 Litre-tank size. High quality standard.
Ideal for compressed air demands up to 8 bar.
Provided with a relay switch, motor protector, adjustable automatic
stop/ start pressure switch, air receiver with safety valve, gauge, drain cock and outlet cock.
The compressor is delivered ready for use.
Laboratory Turbo Pulper Type TP
Capacity: 10 litres at a consistency of 6 per cent
Container: Stainless Steel
Shaft and Turbo-Blades: Corrosion-resisting material
Melt Index Tester MI
for determining the melt index of thermoplastics acc. to DIN 53735,
ASTM D 1238-65 T, ISO 1133 und BS 2782 Part. 1.
The extruding testing material can be seen by a rotatable mirror.
A cutting device will cut the extruded material manually.
Device for measuring the strength of shocks of foils
according to ASTM D 1709-62 T.
Especially of polyethylene for measurements acc. to the methods A and B
Method A:
The distance of the foil clamped in the ring to the testing weight is 66 cm.
The testing weight consists of a semicircular ball of aluminium which has
a diameter of 38 mm.
Method B:
For foils which have more than 100 µ the lower clamping ring is used
which shows a distance of 152, 4 cm from the lower edge of the testing weight consisting of a semicircular ball of aluminium with a diameter of 50, 8 mm - to the surface of the foil.
Video-Microscope-Inspection System
a versatile system for various applications in the laboratory:
Pulp, paper and print ( wood-pulp, fibres, cellulose, filters, paper
surfaces, paper sections, printing inks, etc.) .
Colour-CCD-video camera, high resolution monitor.
Video printer optional. Metric - Software for display and measuring of video images for WINDOWS
Moisture Tester ULTRA X Type 2011
Sturdy and precise for operation in field conditions and in the laboratory
for almost all solid and liquid substances. The principle is drying by means
of Infra-red radiation with simultaneous weighing.
Weighing ranges 60 / 120 / 310 g
Digital display, Taring range substractive,
Sample weight as required, minimum 1 g
Electronic Moisture Meter AQUA BOY
for determining within seconds the moisture content of paper
and card board.
Small, compact pocket size, built-in rechargeable battery.
Exchangeable electrodes
Model PM I for all types of paper, measuring range 4 - 12 per cent
Model PM II for paper, cardboard, measuring range 6 - 30 per cent
Mullen Burst Tester, hand-operated model
measures and indicates the resistance of paper and board to cracking
prior to burst, according to DIN ISO 2758.
Measuring range 0 ... 2000 kPa
Pressure generation by oil pump.
Load and discharge by turning the hand-wheel.
Electronic pressure receiver and digital display
as well as with peak value storage.
Paper Folding Apparatus
for the purpose of book restoration
Construction principle: Inclined Plane
SIZING TESTER PLG 06 and PLG 06V
The factory that can guarantee the good printability of your paper is
flourishing. But you wouldn' t believe the things that have to be taken into account to optimise paper for some printing processes …
Which means that paper has to be tested!
Above all, the important surface structure under the influence of test fluid
( ink and oil) must be tested.
In order to investigate and depict these quality features and their
evaluation, we have developed this instrument.
Pneumatic Punch Press
for the speedy and accurate cutting of circular specimens of 100 cm²
in area, such as paper, card board, cellulose wadding, etc.
Corrugated board can be punched without any deformation or damage.
The punch, made of special steel, is shaped as a circular knife in waveform. The punch is totally enclosed in a cylindrical housing, which
just leaves sufficient space to feed sampling material into the press, for a cutting operation.
Laboratory Punch-Press Model B/ 36-AL
Manual operation, for exact and easy punching of materials.
complete with holding chuck, table top, depth stop, etc.
Technical Data:
Max. pressure: 25 kN ( 2.5 t)
Projection: 150 mm
Max. piston travel: 30 mm
Table size: 300 x 300 mm
Pneumatic Punch Press Model P/ 44
Punching force at 5bar: 35 kN
Porosity Tester for Paper
Method Cobb / Unger
with integrated timing attachment
The instrument is used for determining absorption of liquid mediums, such as water, aqueous solutions, oils, varnishes and others at paper, cardboard and corrugated board from the top and bottom sides within
a predetermined time.
For water, this is effected according to DIN EN 20535
( formerly DIN 53 132) , APPITA/ AS 1301.411, ISO 535, CPPAF.2, FEFCO No. 7, SCAN P 12, P37, TAPPI 441.
Special models:
- for corrugated cardboard up to 15 mm thickness
- for determining absorption & for determining the penetration time
Untuk informasi lebih lanjut dan Pemesanan hubungi :
Distributor, Agent, Penjualan, Pemasangan dan Training.
Jakarta - Indonesia
Kontak Person: Bpk. Ivan, Ibu Dini, Ibu Rahmah
Hp: 0812 8006 9024, 0817 6700 726, 0816 1740 8927, 021-9529 3259, 0816 1740 8926 ( Sri)
Alamat lengkap: Jl. Radin Inten II No. 62 Duren Sawit - Jakarta 13440
Phone: + 62-21 8690 6777, 8690 6771, 8690 6785
Fax: + 62-21 8690 6770
EMAIL: sales@ alatuji.com
Website: www.alatuji.com
Kunjungi Website kami untuk kebutuhan tool-tools dan Hardware perusahaan anda.
Atau silakan hubungi sales consultant, Hotline kami di + 62-21 8690 6777 kami akan berusaha membantu Anda memberikan informasi dalam membuat keputusan pembelian kebutuhan Anda/ perusahaan Anda.
Tampilkan Lebih Banyak